Kent-Moore Tools
Kent-Moore EN-51614 DPF Injector Test Adapters
EN-51614 allows the DPF injector to be tested outside of the exhaust system. Once the DPF injector is removed from the exhaust, it is re-attached to the fuel line upside down, and the block-off plate of EN-51614 is installed on the exhaust manifold to prevent exhaust leaks. The test fixture block is installed to the injector bracket to retain the injector, and a hose is installed over the injector nozzle to direct the fuel released into one of the test tubes from J-45873 fuel return volume test kit. The engine is then started, and the injector triggered for a specific amount of time. The fuel injected during this time is measured to determine if the injector is operating properly.
